Monday 9 July 2018

This simple pin cushion is an adaptation of one I was shown when I first started turning.

For the cushion top, I used a polystyrene ball available at most haberdashery shops. The ball was cut in half and I glued material to it before gluing it into the wooden base. I found that the glue made the material a bit too stiff, and combined with the firm polystyrene, it was too hard to insert the dressmaking pins. I substituted the polystyrene ball for tightly rolled up wadding and found this produced a far softer and more user-friendly surface.

This project is a way of using up small off cuts of timber and also scraps of material. I have used all sorts of material as a covering but prefer to use plain velour as its stretchy properties lends itself well to stretching round the wadding.

A small circular magnet can be added to the underside of the pin cushion by cutting a recess the size of the magnet and gluing it in place. This is a useful addition for picking up any dropped pins or needles.

The turning is quite basic but produces an effective pin cushion which I am sure your family and friends will love to receive as a gift this Christmas.